Table of Contents
Advertisement
Lubrication Schedule
12/12 Every year
1/52 Every Week
1/365 Every day
*
Change hydraulic drive filters.
p See Engine Manufacturer's manual
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
LUBRICATION
Lubricate with grease gun
Oil change
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
Level check
Filter change
8058-056
45
Advertisement
Table of Contents
