Motion Control Levers; Ignition Switch - Husqvarna WH4817E, WH3615E Operator's Manual

3. Motion control levers

The machine's speed and direction are
continuously variable using the two motion
control levers.
When both controls are in the neutral position,
the machine stands still. The controls can be
locked in neutral position by the Neutral bail
By moving both controls an equal amount the
machine moves in a straight line forward.
WARNING!
The machine can turn very
rapidly if one steering control
is moved much further than the
other.
In order, for example, to turn right while
moving forward, move the right control
towards the handle (neutral position). The
rotation of the right wheel is reduced and the
machine turns to the right.
To reverse, squeeze the control levers
against the handle grip.

4. Ignition Switch

The ignition key switch is placed on the
control panel.
16
English-
CONTROLS
Motion control lever
Ignition key
8011-663
8011-656