Choke And Throttle Control; Choke And Throttle Control; Gear Shift Lever; Gear Shift Lever - Husqvarna WG3213P/968999114 Operator's Manual

CONTROLS

5. Choke and Throttle Control

Choke Control
The choke control is combined with the
throttle control. To engage the choke, the
throttle control is moved past the max rpm
setting to its choke position.
Do not use the choke when starting a warm
engine.
Throttle Control
The throttle control regulates the engine
speed and thereby the rate of rotation of the
blades, assuming the control for engaging the
8011-709

Choke and throttle control

mower deck is pulled forward, see Engaging
the Mower Deck.
In order to increase or decrease the engine
speed, the control is moved downward or
upward respectively.
Avoid idling the engine for longer periods, as
there is a risk of the spark plugs fouling.
USE FULL THROTTLE WHEN MOWING, for
best mower performance.

6. Gear Shift Lever

Gear shift lever has five forward gear speeds,
there is also a neutral and reverse gear.
Grip motion control levers before shifting
gears.
8011-482
Gear shift lever in neutral position
17
English-