Blade Replacement - Husqvarna WG3213P/968999114 Operator's Manual

Blade replacement

WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
• Remove blade bolt by turning
counterclockwise.
IMPORTANT INFORMATION
To ensure proper assembly, center hole in
blade must align with star on cutter
housing,
• Install new or re-sharpened blade with
stamped "GRASS side" facing towards
ground/grass (down) or "THIS SIDE UP"
facing deck and cutter housing.
• Install and tighten blade bolt securely.
Tightening torque 90 ft/lb (122 Nm).
IMPORTANT INFORMATION
Special blade bolt is heat treated. Replace
with a Husqvarna bolt if required. Do NOT
use lower grade hardware than specified.
46
English-
MAINTENANCE
1. Blade
2. Center hole
3. Star
4. Cutter housing
5. Blade bolt (special)
Blade attachment, principal
8011-671