Display Icons Overview; Handset And Telephone Base Lights Overview; Connect; Connect The Telephone Base - VTech CS5319 User Manual

Display icons overview

The battery icon flashes
when the battery is low
and needs charging.
The battery icon animates
when the battery is charging.
The handset ringer is off.
There are new voicemail
received from your
telephone service
provider.
ECO The ECO mode activates
automatically to reduce
power consumption when
the handset is within range
from the telephone base.
NEW There are new caller ID
log entries.
Handset and Telephone base
lights overview
Handset lights
On when the handset
speakerphone is in use.
On when the handset
is charging in the
telephone base or
handset charger.
Telephone base lights
On when the
telephone line is in
use.
On when you
are registering a
handset.
Flashes quickly
when there is an
incoming call.
Flashes when
another telephone
sharing the same
line is in use.
Flashes when you
are deregistering all
handsets.
4

Connect

You can choose to connect the telephone
base for desktop usage or wall mounting.
NOTES
• Use only the adapters provided.
• Make sure the electrical outlets are not
controlled by wall switches.
• The adapters are intended to be correctly
oriented in a vertical or floor mount
position. The prongs are not designed to
hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
TIP
• If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall
jack. Contact your DSL service provider
for more information.

Connect the telephone base

Connect the charger

Mount the telephone base

1. Connect the telephone line cord to
the telephone base. Route it through
the wall mount bracket, and then
connect it to the wall jack.
2. Align and place the wall mount
bracket on the standard wall plate.
B
B B
B B
A
5