Table of Contents
Advertisement
SmartLink 4020 User Manual
Service Access
Enable HTTP
When checked access to the web configuration interface (HTTP) of the SmartLink 4020 through the WAN
interface port is enabled.
Note
If the Enable HTTP option is not checked, your WAN service provider will
no longer be able to access the SmartLink 4020 to make
configuration changes.
Enable Ping Reply
When checked, the SmartLink 4020 will reply to ping requests received on the WAN port. If the option is not
checked, the SmartLink 4020 will not respond to ping requests received on the WAN port.
Saving your work
When you are finished configuring settings, click the
Localization
The Localization window contains the following sections:
•
Call Progress Tones (see
•
Distinctive Ring Setting (see
•
Supplementary Service Keys (see
•
Control Timer Values (see
•
FXS Port (see
figure 47
•
Ring Setting (see
figure 48
•
FXS Port Polarity (see
Note
After configuring the sections, click the
page 76) to save the new configuration.
Service Access
Figure 41. Service Access window
figure 42
on page 68)
figure 43
on page 69)
figure 44
on page 71)
figure 46
on page 74)
on page 75)
on page 75)
figure 49
on page 76)
Save Service Access Settings
button (see
figure 49
Save
7 • System
button to save the changes.
on
67
Advertisement
Table of Contents
