Table of Contents
Advertisement
SmartLink 4020 User Manual
6 • Telephony
Call Forward on Busy
Enable call forward on busy service.
Conditional Call Forward
Enable call forward selective service.
Call Waiting
Enable call waiting service.
Anonymous Call Reject
Enable block anonymous calls service—When enabled, calls from anonymous callers will be blocked.
Caller ID
Enable caller ID service.
Call Return
Enable call return service—When enabled, allows you to return a call to the last incoming call, whether the call
was answered or not.
Do Not Disturb
Enable do not disturb service.
Self Caller ID Block
Enable blocking self caller ID shown in the outgoing message.
Outgoing Call Block
Enable blocking of outgoing calls based on the digit pattern specified under outgoing call block.
Dial Out Type
Figure 32. Dial Out Type section of Phone 1 or Phone 2 window
Dial Out Type
Enable Hot-Line and Warm-Line services. To achieve this, one sequence in the dial plan must start with a
pause, with a 0 delay for a Hot Line, and a non-zero delay for a Warm Line.
Hot Line Number
Input the number for Hot Line function—This number will be called immediately when the telephone goes
off-hook.
Phone 1 & Phone 2
57
Advertisement
Table of Contents
