Sony HDC2500 Operation Manual page 46

OPERATION
Page title
PageNo.
<SPIRIT LEVEL>
08
<VF OUT>
09 (U01)
<SWITCH ASSIGN1>
10 (U09)
46
Menu List
Item Settings
INDICATOR ON, OFF
V POSITION 0 to 99, 97
ANGLE
OFFSET –99 to +99, 0
SET Execute via ENTER.
ZERO
ANGLE
CLEAR Execute via ENTER.
VF OUT COLOR, Y, R, G, B, (COLOR), (Y),
(R), (G), (B), (RET), (R+G), (R+B),
(G+B)
RET MIX VF ON, OFF, (ON), (OFF)
MIX DIRECTION MAIN, RET
MIX VF MODE Y-MIX, WIRE(W), WIRE(B)
MIX VF LEVEL 0 to 80%
CHARACTER LEVEL 0 to 5, 5
PinP ON, OFF, (OFF)
POSITION 1, 2, 3, 4
SIZE 1/3, 1/4
GAIN L: –6, –3, 0, 3, 6, 9, 12 dB
M: –6, –3, 0, 3, 6, 9, 12 dB
H: –6, –3, 0, 3, 6, 9, 12 dB
ASSIGNABLE OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2, VF
DETAIL, MIX VF, 5600K, FAN
MAX, D.EXTENDER, VF ASSIGN
SW1, VF ASSIGN SW2, SPIRIT
LEVEL INDICATOR, FOCUS
ASSIST INDICATOR, PinP
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, VF DETAIL,
MIX VF, 5600K, FAN MAX,
D.EXTENDER, VF ASSIGN SW1,
VF ASSIGN SW2, SPIRIT LEVEL
INDICATOR, FOCUS ASSIST
INDICATOR, PinP
Description
When this is set to ON, BOX MEMORY for
CURSOR does not function.
Sets the inclination angle. (Display only)
Designates the current angle as level (0°).
Sets OFFSET to 0.
Settings in ( ): When HDLA is attached (cannot be
changed)
Settings in ( ): When HDLA is attached (cannot be
changed)
Cannot be used during stand-alone operation.
Not available when HD TRUNK FRAME SYNCHRO
is set to ON.
JN/SY/UC models only.
When HDLA is attached: OFF, EXTENDER, 5600K,
FAN MAX, D.EXTENDER, PinP
Note
When you turn D.EXTENDER ON or OFF, noise
may be generated. This is not a malfunction.
D.EXTENDER does not operate when a 2x speed
motion format is selected.
CE/E models only.
When HDLA is attached: OFF, EXTENDER, 5600K,
FAN MAX, D.EXTENDER, PinP
Note
When you turn D.EXTENDER ON or OFF, noise
may be generated. This is not a malfunction.
D.EXTENDER does not operate when a 2x speed
motion format is selected.