Sony HDC2500 Operation Manual page 16

FRONT/OFF: The intercom headset microphone is turned off.
The intercom audio listening level is adjusted with the
INCOM level control and the INTERCOM LEVEL control
on the front of the camera (page 14).
INCOM level control
Adjust the intercom audio listening level.
Line select switch
Select the intercom line.
PROD: Producer line
ENG: Engineer line
b RET 1 (return video 1) button and select switch
Press the button to display the return video signal selected
with the switch on the viewfinder screen.
c RET 2 (return video 2) button and select switch
If you use an additional return video system in addition to
return video 1, press the button to display the return video
signal selected with the switch on the viewfinder screen.
Note
The RET 1 button has priority over the RET 2 button if both
buttons are pressed.
If RET 1 and RET 2 buttons are pressed at the same time, the
two buttons function as the RET 3 button when setting
<RETURN> 12 of the OPERATION menu.
d LIGHT switch
Set to ON to illuminate the operation panel.
16
Locations and Functions of Parts
European type:
For CE (Europe) and E (China and South
Asia) models (for PAL areas)
For details on the differences among models, see "Overview"
on page 5.
2
RET1 2 3
1 4
ENG PROD
MIC
LINE1 PROD
OFF
ENG
INTERCOM 1
a
PGM1 control
PROD control
ENG control
ENG PROD
MIC
LINE1 PROD
OFF
ENG
INTERCOM 1
MIC LINE1 switch
MIC LINE2 switch
TRACKER control
a INTERCOM1 and INTERCOM2 controls and switches
The reception level controls are common to intercom 1 and
intercom 2. The talk lines can be set independently for
intercom 1 and intercom 2.
ENG (engineer line) control:
Adjust the intercom audio listening level of the engineer line.
PROD (producer line) control
Adjust the intercom audio listening level of the producer line.
PGM1 (program 1) control
Adjust the audio listening level of program 1.
PGM2 (program 2) control
Adjust the audio listening level of program 2.
TRACKER control
Adjust the intercom audio listening level at the TRACKER
connector (page 17) on the connector panel when using the
connector for intercom.
MIC LINE1 (intercom microphone line 1) switch
Select the talk line for intercom 1.
PROD: To talk over the producer line
3 4
RET2 2 3
LIGHT
1 4
ON
OFF
PGM1 PGM2
LEVEL
MIC
TRACKER
LINE2 PROD REAR
OFF
ENG
FRT
INTERCOM 2
PGM2 control
PGM1 PGM2
LEVEL
MIC
TRACKER
REAR
LINE2 PROD
OFF
ENG
FRT
INTERCOM 2
LEVEL switch