Sony HDC2500 Operation Manual page 52

PAINT
Page title
PageNo.
<MULTI MATRIX>
P13
<SHUTTER>
P14
52
Menu List
Item Settings
PHASE 0, 23, 45, 68, 90, 113, 135, 158,
180, 203, 225, 248, 270, 293, 315,
338
HUE –99 to +99, 0
SAT –99 to +99, 0
ALL CLEAR Execute via ENTER.
GATE ON, OFF, (SKN)
MATRIX ON, OFF
PRESET ON, OFF
SMPTE-240M, ITU-709, SMPTE-
WIDE, NTSC, EBU, ITU-601
USER ON, OFF
MULTI ON, OFF
SHUTTER ON, OFF, (ON), (OFF)
59.94i: 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
50i: 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000
29.97PsF: 1/40, 1/60, 1/100,
1/120, 1/125, 1/250, 1/500,
1/1000, 1/2000
25PsF: 1/33, 1/50, 1/100,
1/125, 1/250, 1/500,
1/1000, 1/2000
24PsF/23.98P: 1/32, 1/48,
1/96, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
59.94P: 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
50P: 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000
ECS FREQ 59.94i: 60.00 to 4300 Hz
50i: 50.00 to 4700 Hz
29.97PsF: 30.00 to 2700 Hz
25PsF: 25.00 to 2300 Hz
24PsF/23.98PsF: 24.00 to 2200 Hz
59.94P: 59.96 to 4600 Hz
50P: 50.03 to 4600 Hz
Description
Selects an axis (angle) at PHASE for which the
multimatrix adjustment to be made, and set HUE
and SAT. (HUE and SAT can be adjusted
independently for 16 axes.)
(SKN): Displayed when SKIN GATE of <SKIN
DETAIL> is ON.
Settings in ( ): When a remote control unit/panel or a
CCU is not connected (cannot be changed)
Step shutter selection
Note
The available settings for HDC2400/2550 are
59.94i, 50i, 59.94P and 50P only.
Note
The available settings for HDC2400/2550 are
59.94i, 50i, 59.94P and 50P only.