This feature allows you to hold an existing call, dial another extension or even
an external number, conduct a conversation without the original caller over-
hearing, and then return to the original caller.
Activate Enquiry Call
- press Transfer key, listen for internal dial tone
- dial the required extension number or dial "0" and then
the required external number
- conduct your conversation
- press Transfer Return key to return to the original call
You may use the Alternating key to switch between the original and 3rd party
calls. In each case the other party is automatically placed on hold.
You can only use the Alternating feature on a Set T8 if you have an Alternating
key.
The Alternating code ∗ ∗ ∗ ∗ ∗ 27 will not function on a Set T8.
Enquiry Call
9