Call Forwarding Preset - Siemens Hicom 300 Operating Instructions Manual

Call Forwarding Preset

Your line can be forwarded to a predetermined extension for answering.
This can be to either a Digital or analogue extension.
Programme Preset Extension Number
- press Programme key
- press Call Forward key twice or dial ∗ ∗ ∗ ∗ ∗ 11
- dial required extension number
- press Programme key
- Call Forward LED is on (if equipped)
The predetermined extension number has now been permanently programmed.
Calls will now go to the Preset destination immediately.
When you lift your handset, special dial tone will also be heard to remind you
that the feature is activated.
Deactivate Call Forwarding
- press Call Forward key or dial 10
- Call Forward LED goes off (if equipped)
When Preset Call Forward destination has been programmed but deactivated
it will serve as Call Forward Busy or Call Forward No Answer i.e. If your
extension rings for longer than +/- 25 seconds it will automatically divert to the
Preset extension number.
16