Aastra 610d User Manual page 58

Personalizing Your Phone
■ Changing the User PIN
You want to change the PIN used to lock/unlock your phone (see Chapter
phone", page 49 and
The factory setting is digit combination "0000"; you can select any 2 to 10-digit combination for
your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the factory setting.
Notes:
• Your User PIN applies to all your phones.
• Do not confuse the User PIN with the Admin PIN (see chapter
Settings
General
New user PIN
<Old PIN>
<New PIN>
<New PIN>
58
"Unlocking your phone", page 50).
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to General and press the
Scroll to New user PIN
➔
The display shows
Enter the old PIN and confirm with the
➔
The display shows
Enter the new PIN and confirm with the
➔
The display shows
Enter the new PIN a second time and confirm with the
➔
New PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with the *47 function code (see "User's Guide */
# Procedures").
"Changing the Admin
Menu
Select softkey.
Select softkey.
and press the Select softkey.
User PIN.
Ok softkey.
New user PIN.
Ok softkey.
Confirm user PIN.
"Locking your
PIN", page 59).
softkey.
Ok softkey.
Aastra 610d