Table of Contents
Advertisement
User Manual
Parameter description:
Model name:
The model name of this device.
System description:
As it is, this tells what this device is. Here, it is "20-Port 10/100/1000BaseT/TX + 4
TP/(100/1G) SFP Combo + 2 (100/1G) SFP L2 Plus Managed Switch".
Location:
Basically, it is the location where this switch is put. User-defined.
Contact:
For easily managing and maintaining device, you may write down the contact person and
phone here for getting help soon. You can configure this parameter through the device's
user interface or SNMP.
Device name:
The name of the switch. User-defined.
System Date:
Display the current system time and date. The field format is YYYY-MM-DD HH:MM:SS
System up time:
The time accumulated since this switch is powered up. Its format is day, hour, minute,
second.
BIOS version:
The version of the BIOS in this switch.
Firmware version:
The firmware version in this switch.
Hardware-Mechanical version:
The version of Hardware and Mechanical configuration. The figure before the hyphen is the
version of electronic hardware; the one after the hyphen is the version of mechanical.
Serial number:
The serial number is assigned by the Signamax, Inc. factory.
Host IP address:
The IP address of the switch.
Subnet Mask:
Displays the IP subnet mask assigned to the device.
Gateway IP Address:
Displays the default gateway IP address assigned to the device.
Host MAC address:
It is the Ethernet MAC address of the management agent in this switch.
Console Baud rate:
Displays the baud rate of the RS232 (COM) port.
RAM size:
The size of the RAM in this switch.
Flash size:
The size of the flash memory in this switch.
Bridge FDB size :
8
Publication date: Feb., 2013
Revision A3
Advertisement
Table of Contents
