Operation
Accessing both of your computers from a single console could
not be easier. The CS-62
uses Hotkey combinations to
A
provide KVM focus to the computers. The Hotkey combinations
allow you to:
M Select the Active Port
M Invoke Auto Scan Mode
M Set the Auto Scan Time Interval
Selecting the Active Port
You can toggle the KVM focus between the two computers by
pressing and releasing the Scroll Lock key twice:
[Scroll Lock] [Scroll Lock]
Auto Scan Mode
The CS-62
's Auto Scan feature automatically switches the
A
KVM focus between the two computers at regular intervals so
that you can monitor their activity without having to take the
trouble of switching yourself. The default time interval is 5
seconds. To invoke Auto Scan Mode:
Press and release the Left Shift key; then press and release the
Right Shift key:
[Left Shift] [Right Shift]
Once scanning begins, it continues until you press the
[Spacebar] to exit Auto Scan Mode. The port that was currently
active at the time scanning stopped remains active.
Note: While Auto Scan Mode is in effect, ordinary keyboard
and mouse functions are suspended. You must exit Auto
Scan Mode by pressing the [Spacebar] in order to regain
normal control of their use.
- 7 -
2003-06-10