Table of Contents
Advertisement
Datafilling the configuration fields
The previous section, "About configuration information," describes the
types of information the SNMP agent uses to manage a WaveSwitch 100.
This section gives the rules for entry of configuration data that you can enter
directly into the WaveSwitch 100 using the Management Configuration
window of the console (Figure 15) or load remotely from a configuration
file you load onto a network station.
To configure the WaveSwitch 100 locally, see page 77.
To configure the WaveSwitch 100 remotely, see page 79.
IP address
The line specifying the IP address has the following format:
IP address: <ip_address>
The IP address is specified in Internet standard dot notation. The numbers
in the address are in decimal in the range of 0 to 255. Sample addresses are
192.1.1.15, or 2.155.7.45.
For information about assigning IP addresses, see Internetworking with
TCP/IP, Volume 1, Principles, Protocols, and Architecture, by Douglas E.
Comer (Englewood Cliffs, NJ: Prentice-Hall, 1991).
Figure 15
The Management Configuration window of the System Manager (SYSMAN)
Up Time:
IP address:
Default gateway address:
Number of subnet bits:
Name:
Location:
Contact:
Management Communities:
public 0.0.0.0
Trap Communities:
F1-Commit Changes F2-Ignore Changes
0:00:04:55__Plaintree WaveSwitch 100 System Manager
0.0.0.0
0.0.0.0
0
Uninitialized
Uninitialized
Uninitialized
Datafilling the configuration fields
Subnet Mask: 255.0.0.0
Ctrl-X: Exit
WaveSwitch 100 Ethernet Switch User Manual 73
Advertisement
Table of Contents
