Plaintree WaveSwitch 100 User Manual page 21

Figure 16 Example configuration file 84
Figure 17 A typical protocol stack 92
Figure 18 ETHERNET_II-The Ether Type field is always greater than
1500 decimal 94
Figure 19 IEEE 802.3 The frame length is always less or equal to 1500
decimal 95
Figure 20 FDDI-The frame control octet carries priority and SMT-LLC
frame identification 96
Figure 21 ETHERNET_802.2 IEEE 802.3 MAC with 802.2 LLC 97
Figure 22 FDDI_802.2 FDDI MAC with 802.3 LLC 97
Figure 23 ETHERNET_802.3raw-The Novell default for IPX until
NetWare 3.12 98
Figure 24 ETHERNET_SNAP-IEEE 802.3 with 802.2 SNAP 100
Figure 25 FDDI_SNAP-FDDI with 802.3 SNAP 101
Figure 26 ETHERNET_SNAP with RFC 1042 102
Figure 27 FDDI_SNAP with RFC 1042 102
Figure 28 WS2 can process only 802.3_SNAP RFC 1042 frames 103
Figure 29 Translation between Ethernet II and FDDI RFC 1042 frame
formats 104
Figure 30 Frame translations done by the WaveSwitch 100 at each
FDDI port 106
Figure 31 FDDI_SNAP with IEEE 802.1h bridge tunnel 107
Figure 32 Two views of the same network: a physical view (left) and a
stack/frame view 108
Figure 33 Migrating a Novell network from one frame type to
another 109
Figure 34 Example frame-type environments 111
WaveSwitch 100 Ethernet Switch User Manual xxi
Contents