Table of Contents
Advertisement
Console command-line commands
To retrieve the value of a specified MIB object, enter
GET [mib_object]
If the MIB object is part of a table, you must add information (separated
from the object name by a period) to distinguish it from other instances.
For example,
Get [mib_object.port_number]
Get [mib_object.port_number.index_number]
Note: For additional instructions on retrieving MIB objects, see the first
page of individual MIB sections, listed on page 113.
For a list of error messages associated with this command, see page 56.
GETNEXT
GETNEXT displays the value of the next MIB object in the MIB.
If a MIB object is not specified, the value of the object following the object
referenced by the last successful GET, GETNEXT, or SET operation is
displayed.
To retrieve the value of the next MIB object, enter
GETNEXT [mib_object]
For a list of error messages associated with this command, see page 56.
SET
SET changes the value of a specified MIB object to a specified value.
If the SET is successful, a GET is done automatically so you can verify the
change.
The value you specify can be an integer (specify hexadecimal numbers by
prefixing them with 0x), a text string, or an octet string (which is a sequence
of hexadecimal bytes separated by blanks).
To set a MIB object, enter
SET [mib_object] [value]
If the MIB object is part of a table, you must add information (separated
from the object name by a period) to distinguish it from other instances.
52 WaveSwitch 100 Ethernet Switch User Manual
12195
Advertisement
Table of Contents
