Plaintree WaveSwitch 100 User Manual page 157

Object name
dot1dBase group
dot1dBaseBridgeAddress
dot1dBaseNumPorts
dot1dBaseType
dot1dBasePort
dot1dBasePortIfIndex
dot1dBasePortCircuit
dot1dBasePortDelayExceededDiscards
dot1dBasePortMtuExceededDiscards
dot1dStp group
dot1dStpProtocolSpecification
dot1dStpPriority
dot1dStpTimeSinceTopologyChange
dot1dStpTopChanges
Data
type Access Description
MAC R The MAC address used as the
Address unique reference to this unit.
When it is concatenated with
dot1dStpPriority, a unique
BridgeID is formed which is
used by the Spanning Tree
Protocol.
Integer R The number of ports on this
WaveSwitch 100.
Integer R The type of bridging the
WaveSwitch 100 does.
Integer R The port number of the port for
which this entry contains bridge
management information
Integer R The value of the instance of the
ifIndex object, defined in MIB-II,
for the interface corresponding
to this port
Object R The name of an object instance
identifier unique to this port
Counter R The number of frames
discarded by this port due to
excessive transit delay through
the WaveSwitch 100.
Integer R The number of frames
discarded by this port due to
excessive size.
Integer R The version of the Spanning
Tree Protocol (STP) that the
system is running
Integer R/W The first two octets of the
Bridge ID; the last six octets
are given by the value of
dot1dBaseBridgeAddress and
are not writable.
Integer R The elapsed time, in
hundredths of a second, since
the last topology change was
detected by the bridge entity
Counter R The number of topology
changes detected by this unit
since the management entity
was last reset.
continued
WaveSwitch 100 Ethernet Switch User Manual 135
Bridge MIB objects
Default
value
(various)
(various)
Trans-
parent
(various)
(various)
(various)
0
0
3
0x8000
(unique)
0