Frame Translations Done By The Waveswitch 100 At Each Fddi Port - Plaintree WaveSwitch 100 User Manual

Frame translations done by the WaveSwitch 100 at each FDDI port

Frame translations done by the WaveSwitch 100 at each FDDI port
The first two translations of each group are specified by IETF RFC 1042
and IEEE recommendation 802.1h.
The translation table at each FDDI port can contain 0, 1, 2, 3, or all,
Ethernet_II Ether Type identifiers.
Figure 30
Frame translations done by the WaveSwitch 100 at each FDDI port
802.1H translation table of the FDDI port (Default)
Ethernet II
Ethernet 802.3
and 802.2 SNAP
and RFC 1042
Ethernet 802.3
and other 802.2
Ethernet II
Ethernet 802.3
and 802.2 SNAP
and RFC 1042
Ethernet 802.3
and other 802.2
106 WaveSwitch 100 Ethernet Switch User Manual
Ethernet II Ether Type identifier NOT in the
Ethernet II Ether Type identifier IN the
802.1H translation table of the FDDI port
Ethernet
or
Fast
Ethernet
FDDI and
802.2 SNAP
and RFC 1042
FDDI and
other 802.2
FDDI and
802.2 SNAP
and 802.1H
bridge tunnel
FDDI and
802.2 SNAP
and RFC 1042
FDDI and
other 802.2
FDDI
12195