Formulating Functions - Aastra 5361 User Manual

Personalizing your phone

Formulating functions

This section explains how to activate an individual function, for example call for-
warding unconditional, with the aid of function commands and function codes
and how to assign it to a key.
Function commands, function codes
You can use the predefined selection to allocate functions to a configurable key (see
chapter "Store a function under a key – function
your own functions using function commands and function codes (select
urable function). The function commands are listed here; the function codes can be
found in the User's Guide "User's Guide Function Codes" on the
You can use function commands to define a function to suit your personal require-
ments. A function can consist of one or more function commands, function codes,
and the phone number.
The following function commands are available:
"A"
"I"
"H"
"X"
"P"
"N"
"."
"Z"
"R"
"Y"
Other formulation examples:
"IR"
"I201"
"I*21201X"
98
Seize line with highest priority
Seize line
Seize line in hands-free mode
Disconnect
Pause 1 second before the next operation
Use the phone number entered in call preparation
Control key function (up-circuit system)
Activate/deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line
Seize line ("I"),
Dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
key", page 93). You can also write
Aastra DocFinder.
Aastra 5361/Aastra 5361ip
eud-1280/1.2 – R3.0 – 04.2013
Free config-