Tracking A Malicious Call - Aastra 5361 User Manual

Suppressing your call number from your called party's terminal
display
You do not want your call number to appear on the terminal display of a called party
in the public network.
You have two possibilities:
• If you never want the phone number to be displayed, set
• To suppress your call number display for certain calls only, select the
Per call before dialling your party's call number.
This function must be stored under a function key (see chapter
page 92).
You can also execute the function with a function code (see "User's Guide Function
Codes" on the Aastra
CLIR

Tracking a malicious call

Your are being threatened or molested by a call. You want to identify the caller.
Using the (MCID: Malicious Call Identification) function the provider records the fol-
lowing call data: Your phone number, the caller's phone number, and the date and
time of the call.
MCID has to be enabled by your provider. Your provider will inform you about access-
ing the recorded call data.
This function must be stored under a function key (see chapter
page 92).
MCID
MCID
Aastra 5361/Aastra 5361ip
eud-1280/1.2 – R3.0 – 04.2013
DocFinder).
Before the call:
Press the function key for CLIR.
Notes:
• CLIR works only with external calls.
• This feature depends on the range of services offered by your provider.
During a call:
Press the function key for MCID.
After the call do not hang up: press the function key for
the busy tone.
Supplementary features
CLIR Permanent.
functionCLIR
"Configuring
"Configuring
MCID while you hear
keys",
keys",
67