Kenmore 795.7802 Series Use & Care Manual page 20

REFRIGERATOR INSTALLATION
Reversing Door Handle
NOTE: Handle appearance may vary from illustrations on
this page.
1. Loosen the two set screws with a 3/32 in. Allen wrench
and remove the handle.
Handle
Screw
2. Loosen the handle mounting fasteners with a ¼ in.
Allen wrench.
Fastener
3. Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Plug button
4. Install the plug buttons on the left side.
Plug buttons
5. Install the handle mounting fasteners on the right side.
Turn handle upside down.
6. Install the handle by adjusting handle footprints to fit
the mounting fasteners. Tighten the set screws with a
3/32 in. Allen wrench.
20
Handle Mounting
Fasteners