Reversing Doors And Handles (Drawer Model) - Kenmore 795.7802 Series Use & Care Manual

Bottom freezer refrigerator
Table of Contents

Advertisement

REVERSING REFRIGERATOR DOORS
(For Freezer Drawer Models)
WARNING
Electrical Shock Hazard
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury.
CAUTION
Remove food and any adjustable door or utility bins
from doors. Failure to do so could result in serious
injury.
TOOLS NEEDED
10mm or 13/32-inch socket wrench (with 2-inch
extension for bottom door hinge)
No. 2 Phillips head screwdriver
¼ inch socket wrench
Flat-head screwdriver for prying
Adjustable wrench
REFRIGERATOR INSTALLATION
Reversing Doors
You may find it more convenient to have the doors open
from the right, rather than from the left as installed by the
factory. The "right side" referred to in the directions is the
side on your right as you face the front of the unit.
1. Remove the top hinge cover screws (1). Remove the
cover(2) by lifting the hidden hook inside the bottom of
the front side of the cover, with a flat-head screwdriver.
2. Using a 10mm or 13/32-inch socket wrench, remove
the three bolts and lift off the top hinge. Set parts
aside.
CAUTION: When removing the bolts, be careful that
the door does not fall forward.
3. Lift the door from the middle hinge pin and remove the
door.
CAUTION: Place the door, inside facing up, on a
non-scratching surface.
17
(1)
(1)
(2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents