Removing And Replacing - Kenmore 795.7802 Series Use & Care Manual

REFRIGERATOR INSTALLATION

REMOVING AND REPLACING

REFRIGERATOR DOORS
WARNING
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
WARNING
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
vents or bottom of the refrigerator. You may be
injured or receive an electrical shock.
CAUTION: Before you begin, remove food and bins
from the doors.
Removing the Refrigerator Door
1. Open the door. Remove the top hinge cover screws (1).
2. Lift up the cover (2) and remove it.
(1)
(1)
(2)
3. Remove the three bolts using a 10mm or 13/32-inch
socket wrench and lift off the top hinge.
CAUTION: When removing the bolts, be careful that
the door does not fall forward.
4. Lift the door from the middle hinge pin and remove
the door.
5. Place the door, inside facing up, on a non-scratching
surface.
14