Kenmore 795.7802 Series Use & Care Manual page 18

REFRIGERATOR INSTALLATION
4. Remove the four screws (1), the hinge pin insert (2) and
the hinge pin brackets (3) from the bottom right side of
the door.
5. Reinstall the hinge pin brackets (1), screws (2) and
hinge pin insert (3) on the bottom left side of the door.
(3)
(2)
(3)
(2)
(1)
(1)
6. Use a ¼ inch hex socket wrench to loosen and remove
the hinge pin (1) from the middle hinge bracket. Use
a10mm or 13/32 in. socket wrench to remove the two
bolts (2). Remove the screw (3) and set the middle hinge
bracket (4) and other parts aside.
7. With a flat-head screwdriver, carefully pry off and
remove the cover over the bolt holes on the left side of
the refrigerator.
8. Remove the outer lower decorative screw from the flange
on the frame between the freezer and refrigerator doors.
(You will need this hole for the middle hinge bracket.)
9. Flip the middle hinge bracket and position it on left
side of refrigerator. Re-attach with two bolts and a
screw.
18
(3)
(4)
(2)
(1)