Kenmore 795.7802 Series Use & Care Manual page 19

10. Reattach middle hinge pin using ¼ in. socket wrench.
Middle Hinge
Pin
NOTE: Bracket has been flipped, but hinge pin stays
in the same orientation with its hexagonal end facing
upward.
11. Insert the decorative screw into the outer hole of the
flange on the right side. Attach cover on the right side.
Cover is force-fitted.
12. Loosen the two screws and remove the left hinge cap.
Middle Hinge
Bracket
Decorative
Screw
REFRIGERATOR INSTALLATION
13. Pace the refrigerator door down over the hinge pin on
the middle hinge pin bracket.
NOTE: The left top hinge, left hinge cover and right hinge
cap are provided for reversing doors.
14. Line up the left top hinge with holes in top of refrigerator.
Insert and tighten the three bolts in the hinge.
Replace the left hinge cover and insert the two screws.
15. Replace the right hinge cap and insert the two screws.
19