Turning The Tv On/Off; Turning On/Off The Power; Standby Mode; Supplying Electric Power To The Antenna - Sharp Aquos LC-40LE820X Operation Manual

Preparation

Turning the TV on/off

POWER a button

Turning on/off the power

• To turn on the power
Press POWER a on the TV. (After a few seconds, an
image appears with sound.)
NOTE
• Wait more than fi ve seconds until you press POWER a on
the TV after inserting the power plug.
• To turn off the power
Switch it off by pressing POWER a on the TV.

Standby mode

• To standby mode
If the TV is switched on, you can switch it to standby
by pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
16
40LE820X_en_au.indd 16 40LE820X_en_au.indd 16
POWER button
Supplying electric power to the
antenna
When you set-up the DTV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Press DTV to access DTV mode.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press b / c / d to select "View setting".
4
Press a / b to select "Channel settings" and
5
then press ENTER.
Press a / b to select "Antenna setup-DIGITAL"
6
and then press ENTER.
Press a / b to select "Supply voltage" and
7
then press ENTER.
Press c / d to select "On" and then press
8
ENTER.
Selected item
Select "On" when your antenna is set-up
On
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Off Select "Off" when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is "Off".)
Description
2010/06/18 16:11:19 2010/06/18 16:11:19