Setting Channels To Your Preference; Digital Settings - Sharp Aquos LC-40LE820X Operation Manual

Watching TV

Setting channels to your preference

You can run the auto search procedure again at any
time by accessing the "Setup" menu and "Programme
setup". Channels can be tuned automatically or
manually.

Digital settings

You can reconfi gure DTV services settings
automatically or manually.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a / b to select "Channel settings" and
4
then press ENTER.
Press a / b to select "Programme setup", and
5
then press ENTER. If you have already set the
password, enter it here.
• See page 28 for setting a password.
The "Digital setting" screen displays and then
press ENTER.
Press a / b to select the desired menu item,
6
and then press ENTER.
Press c / d to select "Yes", and then press
7
ENTER.
H Additional search
Use this menu to add new services automatically after
auto installation has been completed.
H Manual search
Add new services within a specifi ed frequency band.
• Enter the frequency using 0 - 9 numeric buttons.
H Manual adjust
Confi gure various settings for each service using the
Colour (R, G, Y, B) buttons.
Additional search
Manual search
Manual adjust
40LE820X_en_au.indd 21 40LE820X_en_au.indd 21
Yes No
Press a / b to select the desired service.
1
Press the colour button on the remote control
2
corresponding with the item you want to
reconfi gure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Buttons for Manual Adjust operation
Remote
Menu items control
buttons
Lock R
CH Skip G
Delete Y
Sort B
The item position of services can be sorted
1 Press a / b to select the service whose item
position you want to move, and then press B.
DTV 994 SIT 2
DTV 995 SIT 1
2 Press a / b to move it to the desired position, and
then press ENTER.
DTV 994 SIT 1
DTV 995 SIT 2
3 Repeat steps 1 and 2 until all desired service
items are sorted.
Description
When the service is
locked, you must enter
your password whenever
you tune to the service.
Services with a ✓ mark
are passed over when
pressing r / s in the
TV/remote control unit.
The service is deleted
from the list. Execute
one of "Auto installation",
"Additional search" or
"Manual search" to watch
the deleted service again.
The item position of
services can be sorted.
21
2010/06/18 16:11:29 2010/06/18 16:11:29