Selecting A Preset Av Mode; Av Mode - Sharp Aquos LC-40LE820X Operation Manual

Watching TV

Selecting a preset AV MODE

The "AV mode" function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
Press AV MODE.
1
• Present AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
TV input mode
AV MODE: STANDARD
AV MODE: AUTO
AV MODE: DYNAMIC (Fixed)
AV MODE: DYNAMIC
External input mode
AV MODE: STANDARD
AV MODE: AUTO
AV MODE: DYNAMIC (Fixed)
AV MODE: DYNAMIC
AV MODE: x.v.Colour
40LE820X_en_au.indd 33 40LE820X_en_au.indd 33
Using "AV mode" on the menu screen
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER [TV]
AV MODE: MOVIE
AV MODE: GAME
AV MODE: PC
AV MODE: USER [ ]
• You can select a different "AV mode" item for each input
• The item marked with * is available only when selecting
• The item marked with ** is available only when accepting
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Picture".
3
Press a / b to select "AV mode", and then
4
press ENTER.
Press a / b to select the desired item, and
5
then press ENTER.
AUTO
STANDARD
MOVIE
GAME
PC
USER
x.v.Colour
DYNAMIC
DYNAMIC(Fixed)
Selected item Description
The TV automatically sets the appropriate
AUTO
selection from the "AV mode" menu
depending on the lighting conditions and
the type of programme watched.
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier
viewing.
PC* For PC. (Available only when inputting a
PC signal.)
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
x.v.Colour** Produce realistic colour on the TV screen
unlike any other signal.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC Changes the image and sound settings to
(Fixed) the factory preset values. No adjustments
are allowed.
NOTE
mode. (For example, select "STANDARD" for TV input and
"DYNAMIC" for VIDEO input.)
"INPUT4", "INPUT5", "INPUT6", "INPUT7" or "INPUT3"
(PC) from the "INPUT" in the "CH list" menu.
an "x.v.Colour" signal through an HDMI terminal.
33
2010/06/18 16:11:59 2010/06/18 16:11:59