Aquos Link Connection; Connecting An Aquos Bd Player Via The Aquos Link-Compatible Audio System; Connecting An Aquos Bd Player Only; Aquos Link Setup - Sharp Aquos LC-40LE820X Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing INPUT, select the appropriate input source and verify
the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player via the AQUOS LINK-
compatible audio system
HDMI-certifi ed cable
AQUOS BD Player

AQUOS LINK Setup

AQUOS LINK control

Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "AQUOS LINK setup"
2
and then press ENTER.
Press a / b to select "AQUOS LINK control".
3
Press c / d to select "On".
4
NOTE
• For "AQUOS LINK control", go to "Link operation" or
"Setup" s "Option" s "AQUOS LINK setup" in the menu
screen.

AQUOS LINK Auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press OPTION and the "Link operation"
1
screen displays.
46
40LE820X_en_au.indd 46 40LE820X_en_au.indd 46
HDMI-certifi ed
cable
AQUOS LINK-compatible
audio system
Connecting an AQUOS BD
Player only
Optical fi bre cable
HDMI-certifi ed cable
(commercially
available)
Press a / b to select "AQUOS LINK setup",
2
and then press ENTER.
Press a / b to select "Auto power on".
3
Press c / d to select "On".
4
Link operation
AQUOS LINK setup
AQUOS LINK control
Auto power on
Selecting recorder
Settting auto power on by AQUOS LINK
Selecting channel key
Audio return channel
Press MENU to exit.
5
NOTE
• The factory default for this item is "Off".
• For "Auto power on", go to "Link operation" or "Setup" s
"Option" s "AQUOS LINK setup" in the menu screen.
AQUOS BD Player
[On]
On Off
[Auto]
2010/06/18 16:12:27 2010/06/18 16:12:27