Remote Control Unit; Part Names; Turning The Tv On/Off - Sharp Aquos LC-24LE155M Operation Manual

Remote control unit

12
1
2 TIMER
13
3
4
5
14
6
7 15
16
8 17
9
10 18
11
LCDTV
GB104WJSA
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 6.)
2 DISPLAY
Display the channel or input information.
3 TIMER
Set the Sleep Timer and Reminder. (See page 12.)
4 0 – 9
Set the channel.
5 A (Flashback)
Press A to return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 7.)
Inserting the batteries
Before using the TV for the fi rst time, insert two "AAA" size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new "AAA" size batteries.
1 2
Open the battery cover. Insert the two supplied "AAA" size
batteries.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.
7 VOL k /VOL l
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
8 e (Mute)
Press e s Mutes sound.
Press e again s Restores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
9 a /b/ c / d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 COLOUR ADJ. (FREEZE)
Freeze a motion picture on the screen and adjust the colour
tone of the still image. (See page 12.)
11 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
12 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
13 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
14 INPUT (INPUT SOURCE)
Select an input source.
15 CHr/CH s
TV input mode: Select the channel.
(CHr) Increase the channel number.
s
(CH ) Decrease the channel number.
16 MPX
Select the sound multiplex mode.
17 MENU
Display the menu screen.
18 RETURN
MENU mode: Return to the previous menu screen.
3
Close the battery cover.

Part names

TV (Front)
Remote control sensor
POWER indicator
Light off
Lighted (Red)
Lighted (Green)
TV (Rear)
6
7
8 SERVICE
ONLY
9
* USB terminal use for USB media player. (See page 13.)
** Usually do not connect anything to this terminal as it reserved only for service personnel.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

Turning the TV on/off

Turning on/off the power
• To turn on the power
Press POWER on the TV or remote control. (After a few seconds, an image appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV or remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
5 6
Power off.
The TV is in standby mode.
The TV is on.
1 POWER (On/Off) button
2 MENU button
3 INPUT button
4 Channel up (r)/down (
5 Volume up (e)/down (f) buttons
6 USB terminal*
7 INPUT 1 (HDMI) terminal
8 SERVICE ONLY terminal**
9 INPUT 3 terminals
10
1 11 Antenna input terminal
USB
12 INPUT 2 (COMPONENT/AV INPUT)
2
terminals
3
10
4
11
5
12
s
) buttons
/AUDIO output (R/L) terminal