Shortcuts Instructions; Turning Your Tv On Or Off; Selecting The Input Source; Using The Live Tv - Sharp AQUOS User Manual

ENGLISH FRANÇAIS

Shortcuts Instructions

You can use shortcuts on the remote control for fast operation.

Turning your TV on or off

To turn your TV on:
1. Connect the power cord to the back of the TV, then plug the power cord into an AC outlet.
2. When the TV is powered on, press the [
To turn your TV off, press the [
NOTES
• When your TV is in standby mode, it is still consuming power. To completely disconnect power, please remove the
plug from the AC outlet.
• If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.

Selecting the input source

Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [INPUT] button on the remote, the list of Source appears.
2. Press the D-pad arrows of your remote to select the input source.
3. Press the [OK] button to confirm your selection.

Using the Live TV

To view broadcast programs, press the [Live TV] button on your remote.
Channel search guide
When you select ANT/CABLE as input, if no TV channels were saved before, you will be prompted to do a channel
search. You can also go to Setting menu > Channel to change the channel settings.
Launch Live TV
After channel tuning is done for the first time, the screen will display Live TV operating tips, including: how to load the
channel list, how to Load info Bar and so on.
[Menu] Load more functions
[OK] Load Channel List
] Load Info Bar
[
[BACK] Load previous channel
Viewing channel information
As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears on the top
of the screen.
1
5-2
6 AT05-2
7
12:09 AM Thu. 30 Jun.
ESPAÑOL
] button on the remote to turn on TV.
] button on the remote.
2 3 4
AT05 480i
Antenna
10:00 PM 1:00 AM
1:00 AM - 4:00 AM AT05 480i
9
14
5
│ 1/1 unknown 5.1CH │ 4:3 │ 480i │ CC
10
8