Selecting Recorder; Selecting Channel Key; Audio Return Channel (Arc) - Sharp Aquos LC-40LE820X Operation Manual

AQUOS LINK

Selecting recorder

You can select a recorder for the recording from several
connected recorders.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "AQUOS LINK setup",
2
and then press ENTER.
Press a / b to select "Selecting recorder", and
3
then press ENTER.
Select the recorder, and then press ENTER.
4
Press MENU to exit.
5
NOTE
• If you have connected the AQUOS LINK-compatible audio
system between the TV and a CEC-compatible recorder,
the input source's indication changes from "INPUT4" to
"INPUT4 (Sub)" as it is shown below.
Selecting recorder
Selecting recorder for recording
using the [REC] button
INPUT4 (Sub)
[ 1.1.0.0 ]
:Select
• For "Selecting recorder", go to "Link operation" or "Setup"
s "Option" s "AQUOS LINK setup" in the menu screen.

Selecting channel key

This function allows you to select the channel of the
connected HDMI device using the TV's remote control unit.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "AQUOS LINK setup",
2
and then press ENTER.
Press a / b to select "Selecting channel key",
3
and then press ENTER.
40LE820X_en_au.indd 47 40LE820X_en_au.indd 47
Link operation
AQUOS LINK setup
AQUOS LINK control
[On]
Auto power on
[Off]
Selecting recorder
Selecting recorder for recording
using the [REC] button
Audio return channel
[Auto]
RETURN :Back
Press a / b to select the input source of the
4
connected HDMI device you want to control
using the TV's remote control unit.
Press c / d to select "On".
5
NOTE
• For "Selecting channel key", go to "Link operation" or
"Setup" s "Option" s "AQUOS LINK setup" in the menu
screen.

Audio return channel (ARC)

If this function is set to "Auto", the TV can send audio data for
video content shown on the TV to a connected audio device
with just one ARC-compatible cable. Using this function
eliminates the need to use a separate digital or analogue
audio cable.
Press OPTION and the "Link operation"
1
screen displays.
Press a/b to select "AQUOS LINK setup",
2
and then press ENTER.
Press a / b to select "Audio return channel".
3
Press c / d to select "Auto" or "Off".
4
Press MENU to exit.
5
Connection for using "Audio return channel"
You need to use ARC-compatible cables/devices and
connect to the INPUT4 terminal to activate this function. The
connection method is the same as the "Connecting an
AQUOS BD player only" on page 46.
NOTE
• For "Audio return channel", go to "Link operation" or "Setup"
s "Option" s "AQUOS LINK setup" in the menu screen.
• The ARC (Auto Return Channel) function works only
when using the INPUT4 terminal.
47
2010/06/18 16:12:30 2010/06/18 16:12:30