Selecting Media Type For Cec-Compatible Recorder; Listening With The Aquos Link-Compatible Audio System; Listening With The Aquos Tv Speaker System; Manually Changing The Aquos Link-Compatible Audio System's Sound Mode - Sharp Aquos LC-40LE820X Operation Manual

AQUOS LINK

Selecting media type for CEC-compatible recorder

If your recorder has multiple storage media, select the
media type here.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "Media change", and
2
then press ENTER.
Select the desired medium, such as DVD or
3
HDD. The media type changes every time you
press ENTER.
NOTE
• You can go to "Media change" from "Link operation" in the menu
screen.
Listening with the AQUOS LINK-
compatible audio system
You can choose to listen to the TV sound only from the
AQUOS LINK-compatible audio system.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "Change audio output
2
device", and then press ENTER.
Press a / b to select "By AQUOS audio SP",
3
and then press ENTER.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS LINK-compatible audio system is audible.
• You can use VOL k / l and e (Mute).
NOTE
• You can go to "By AQUOS audio SP" from "Link operation" in the
menu screen.
Listening with the AQUOS TV speaker
system
You can choose to listen to the TV sound only from the
AQUOS TV speaker system.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "Change audio output
2
device", and then press ENTER.
Press a / b to select "By AQUOS SP", and
3
then press ENTER.
NOTE
• You can go to "By AQUOS SP" from "Link operation" in the
menu screen.
40LE820X_en_au.indd 49 40LE820X_en_au.indd 49
Manually changing the AQUOS LINK-
compatible audio system's sound mode
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "Sound mode change".
2
Link operation
Recorder power on/off
Top menu/title list
Setup menu
Media change
Change audio output device
[By AQUOS audio SP]
Sound mode change
Model select
AQUOS LINK setup
The sound mode changes every time you
3
press ENTER.
• Refer to the operation manual of the AQUOS
LINK-compatible audio system for details.
NOTE
• You can go to "Sound mode change" from "Link operation"
in the menu screen.

HDMI device selection

If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Press OPTION and the "Link operation"
1
screen displays.
Press a / b to select "Model select", and then
2
press ENTER. The HDMI device changes
every time you press ENTER.
NOTE
• You can go to "Model select" from "Link operation" in the
menu screen.
49
2010/06/18 16:12:35 2010/06/18 16:12:35