LC-70LE735U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
LC-70LE735U LIQUID CRYSTAL TELEVISION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE735U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,...
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.
Caution regarding the power supply (for AN-3DG20) • Use the USB cable to connect to a USB terminal of a 3D compatible SHARP TV for supplying power. Supplying power using other devices may lead to heat generation or battery damage.
Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery ( g 1) Page 9 ( g 2) Page 10 • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE Attaching the Stand •...
IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. 30º 17´ (5 m) 30º 30º 30º...
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
Part Names TV (Front) Center Icon illumination (See page 33.) *1 OPC: Optical Picture Control (See page 27.) *2 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D Glasses. TV (Rear/Side) POWER button...
Part Names Remote Control Unit • When using the remote control unit, point it at the TV. POWER: Switch the TV power on or enter standby. (See page 18.) TV, STB, DVD•VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 55 to 56 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD•VCR or AUDIO) and...
Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or PC Image quality differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 13 and 22.) For connecting the TV to external equipment, use commercially available cables.
Connecting to External Equipment ■ When using Component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box (Red) • To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁ ed cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV ampliﬁ er for surround system • Letting the TV output the audio to an AV ampliﬁ er: *1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical ﬁ...
Connecting to External Equipment Connecting a PC Refer to page 62 for a list of PC signals compatible with the TV. ■ When using HDMI cable (HDMI 1, 2, 3 or 4): • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certiﬁ ed cable to the HDMI 1 terminal, connect a Ø...
Watching TV Turning On/Off the Power POWER (On/Standby) Press POWER on the TV or on the remote control unit to turn the power on. • The Initial Installation starts when the TV powers on for the ﬁ rst time. If the TV has been turned on before, the Initial Installation will not be invoked.
Watching TV Antenna & Cable/STB Select the type of connection you will use to watch TV. Press c / d to select "Antenna & Cable" or "Set- top box", and then press ENTER. Antenna & Cable Set-top box To watch TV via an antenna or cable connection (without using a set-top box): Select "Antenna &...
Watching TV Completed The settings conﬁ rmation screen is displayed. Conﬁ rm the information displayed on the screen, and then press ENTER. Examples of the settings conﬁ rmation screen When one or more channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out.
Direct Button Operation Changing Channels You can change channels in several ways. Method 1 Using CH on the remote control unit or on the TV. Method 2 Using remote control buttons 0-9, • (DOT). Examples: To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5 ENT.
Direct Button Operation AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.
Direct Button Operation VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
• The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. LCFONT: • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy- to-read characters on LCD screens. Menu Operation Buttons...
On-Screen Display Menu Menu Items • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ...Pages 27 and 43...
On-Screen Display Menu Picture Settings Adjusts the picture to your preference with the following picture settings. Example Picture Settings AV MODE (Changing Pic.Quality) [STANDARD] [On:Display] Backlight 3D Brightness Boost [Middle] Contrast [ 30] Brightness [ 0] Color Tint [ 0] Sharpness Advanced Press MENU to display the MENU screen, and then...
On-Screen Display Menu Color Gamut Range You can set the color gamut range. Standard: Standard color gamut. Expanded: More vivid colors with expanded color gamut. • "Color Gamut Range" is only available when AV MODE is set to "MOVIE" or "MOVIE (3D)". Color Temp.
On-Screen Display Menu Audio Settings You can adjust the sound quality to your preference with the following settings. Example Audio Settings Auto Volume [Off] Treble [ 0] Bass [ 0] Balance 3D Surround [Off] Bass Enhancer [On] Clear Voice [Off] Reset Press MENU to display the MENU screen, and then press c / d to select "Audio Settings".
On-Screen Display Menu Power Control Power control setting allows you to save energy. Example Power Control Audio Only Power Saving Standard] No Signal Off No Operation Off [Disable] Press MENU to display the MENU screen, and then press c / d to select "Power Control". Press a / b to select a speciﬁ...
On-Screen Display Menu System Options Example System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Menu Design Operation Lock Out Icon Light Up Setting Demo Mode Press MENU to display the MENU screen, and then press c / d to select "System Options". Press a / b to select a speciﬁ...
On-Screen Display Menu Change CC Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. • The information displayed varies depending on the program you are watching. • You can change Closed Caption by pressing CC on the remote control unit.
On-Screen Display Menu Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style".
On-Screen Display Menu Initial Setup Example Initial Setup EZ Setup Broadcasting Setup Internet Setup Language [English] ® DivX Setup Individual Setup Wall Mount Audio Setup [No] FAV APP Key Assign Reset Press MENU to display the MENU screen, and then press c / d to select "Initial Setup".
On-Screen Display Menu Favorite CH (Favorite Channel Setting) This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register"...
On-Screen Display Menu V-Chip V-CHIP is an electronic ﬁ ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu Information Example Information Identiﬁcation Digital Caption Info. Software Update Netﬂix Help VUDU Help Press MENU to display the MENU screen, and then press c / d to select "Information". Press a / b to select a speciﬁ c adjustment item, and then press ENTER.
To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated.
On-Screen Display Menu Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update ﬁle. During the data checking, “Checking” blinks. Now checking the data in the USB memory device. Checking •...
You can use special 3D Glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through SHARP 3D Glasses sold separately. • To produce 3D images, liquid crystal shutters in the 3D Glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV.
Enjoying 3D Image Viewing Viewing 3D Images • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D Image Signal That Can Be Detected Automatically The image signal may contain a 3D identiﬁ...
Enjoying 3D Image Viewing Switching from 3D to 2D Mode Press c / d to select the 2D signal type ( “Side by Side” or “Top and Bottom”) and then press ENTER. Side by Side Select when two images are displayed next to each other. •...
Enjoying 3D Image Viewing 3D Setup You can make various settings to enhance 3D image viewing. Example System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Press MENU to display the MENU screen, and then press c / d to select “System Options”. Press a / b to select “3D Setup”, and then press ENTER.
Enjoying 3D Image Viewing • Appropriate 3D Glasses (sold separately) are required to view 3D images. Purchase 3D Glasses for use with Sharp brand 3D LCD TVs. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses.
Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data.
Enjoying Photo/Music/Video Playback Select the Files to Play Back • To play back data on a USB memory device, insert the USB memory device on the TV. USB mode is selected automatically. (Go to step 2) • Use the following procedure to switch back to USB mode after switching from USB mode to another mode.
Enjoying Photo/Music/Video Playback Playing Back Files on a USB Memory Device Photo Mode Viewing Thumbnails Example picture 1 picture 2 picture 3 Buttons for thumbnail operations Buttons Description a / b / c / d Select a desired item. ENTER Display the photo.
Enjoying Photo/Music/Video Playback ■ Select Slide Show Interval Specify the length of time before the next image appears. Press D to display the USB MENU screen. Press a / b to select "Select Slide Show Interval", and then press ENTER. a / b Press to select...
Enjoying Photo/Music/Video Playback Music Mode Example music 1 music 2 music 3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_03.MP3 0:14 / 4:35 Buttons for music mode Buttons Description a / b / c / d Select a desired item. ENTER Play music.
Enjoying Photo/Music/Video Playback ■ Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing a / b MENU after you press to select "USB Operation Panel" from "System Options" > "View Option". System Options PLAY 0:04:11 / 0:07:42...
Enjoying Photo/Music/Video Playback ® DivX Setup This is the function to conﬁ rm your registration code. You need to register the code at http://www.divx.com. Press MENU to display the menu screen. Press c / d to select "Initial Setup", and then press ENTER.
Enjoying Photo/Music/Video Playback Playing Back Files on a Home Network (DLNA) Server Photo Mode Viewing Thumbnails Example /Root/Pictures/Folders/Pictures Photo2 FolderA FolderB FolderA Buttons for thumbnail operations Buttons Description a / b / c / d Select a desired item. ENTER When selecting a folder icon: Enter this directory.
Enjoying Photo/Music/Video Playback Music Mode Example /Root/Music/Folders/Music Folder1 Folder2 Folder3 SONG_03 SONG_04 SONG_05 SONG_06 SONG_07 Buttons for music mode Buttons Description a / b / c / d Select a desired item. ENTER When selecting a folder icon: Enter this directory.
Other Viewing Options Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. Presetting manufacturer codes Press an appropriate button (STB, DVD AUDIO) to operate the connected equipment.
S.ATLANTA VIEWSTAR ZENITH • Numbers marked with * are SAT codes, all others are STB codes. AUDIO BRAND SHARP SHARP (SOUND BAR) NUMBER REMOTE CONTROL CODE NUMBER 04, 05 04, 05 02, 03, 10, 11, 17, 20 02, 03, 10, 11, 12, 20,...
Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV ampliﬁ er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certiﬁ ed cables to the TV, you can control a recorder or AV ampliﬁ...
Using AQUOS LINK AQUOS LINK Setup Example System Options AQUOS LINK Setup AQUOS LINK Control [On] Auto Power On [Yes] Selecting Recorder Channel Select Key Audio Return Channel [Auto] Press MENU to display the MENU screen, and then press c / d to select "System Options". Press a / b to select “AQUOS LINK Setup”, and then press ENTER.
Using AQUOS LINK One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINK- compatible equipment with a recording function by simply pressing REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording.
Using AQUOS LINK Using the Device Operation Panel You can use the device operation panel to control playback operations. Press OPTION to display the Link Operation Menu screen. Press a / b to select “Device Operation Panel”, and then press ENTER. Press a / b / c / d to select the desired operation.
Using a PC Displaying a PC Image on the Screen VIEW MODE You can select the screen size. Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
Using a PC Example System Options View Option 3D Setup AQUOS LINK Setup Input Terminal Setting Menu Design k O t Press MENU to display the MENU screen, and then press c / d to select "System Options". Press a / b to select "Input Terminal Setting", and then press ENTER.
Using a PC Control of the TV • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. • Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections.
Using a PC ■ Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER POWER ON COMMAND SETTING R S P W 1 _ _ _ On [RS-232C] 2 _ _ _ On [IP] P O W R 0 _ _ _ Power Off POWER SETTING 1 _ _ _ Power On...
Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the latest Internet information and access a range of useful information for AQUOS users from the original home page*. •...
Using the Internet Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 67.) Wireless LAN router/ access point •...
Using the Internet Internet Setup Example Initial Setup EZ Setup Broadcasting Setup Internet Setup Language [English] ® DivX Setup Connection Type Press MENU to display the MENU screen, and then press c / d to select "Initial Setup". Press a / b to select "Internet Setup", and then press ENTER.
Using the Internet If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. IP Setup Press EXIT to exit from the connected TV feature. Press MENU to display the MENU screen, and then press c / d to select “Initial Setup”.
Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. • You can enter up to 128 characters for text. The text you enter is displayed as you type it in.
Using the Internet Using the Browser ENTER, a / b / c / d a / b / c / d • Press to select a link that you want to jump, and then press ENTER. EXIT • Press the button to return to the TV screen. RETURN •...
Using the Internet Using the Toolbar You can use the toolbar to control the browser and to specify settings. Press D on the remote control unit to display the toolbar. Press c / d to select a function, and then press ENTER.
Using the Internet Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. Display the page that you want to bookmark. Press D on the remote control unit to display the toolbar.
Using the Internet Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. Press D to display the toolbar. Press c / d to select “ ”...
Using the Internet Using Applications via the Internet By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update"...
Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. Unfasten the four screws used to secure the stand in place.
Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No sound Possible Solution •...
Appendix Problem • No picture • Picture quality of HD programs is poor. • The TV sometimes makes a cracking sound. • The original home page cannot be displayed. • Some Internet functions used on a PC are not available from the TV. Troubleshooting - 3D Images Problem •...
• Products that have earned the ENERGY STAR efﬁ ciency. • This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too. • “x.v.Color” and are trademarks of Sony Corporation.
The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁ cation changes for product improvement without prior notice. The performance speciﬁ cation ﬁ gures indicated are nominal values of production units.
This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from station of the same kind, and may not cause harmful interference to systems operating on a primary basis. CONTAINS TRANSMITTER MODULE COFETEL ID: RCPSHRU10-1387 Brand: SHARP Model: RUNTKA810WJQZ Standard...
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-F207WJZZ 11P07-MX-NM...
NE PAS LE RAPPORTER AU MAGASIN OÙ VOUS L'AVEZ ACHETÉ. CONTACTEZ SHARP ELECTRONICS AU : i) Appelez le (905)568-7140 Du personnel Sharp est disponible à ce numéro de 7h00 à 19h00, heure centrale, du lundi au vendredi. ii) Internet à l'adresse http://www.sharp.ca Experiencing HD Images In order to view the highest quality picture on your HDTV, you need High-Deﬁ...
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Connecting an Antenna/Cable Check the type of antenna cable you are using. (for receiving cable-TV without a set-top box, including unscrambled cable HD channels, or off-air HDTV broadcasts) Home Antenna 1.