Bang & Olufsen BeoCenter 2300 User Manual page 14

14
> Using the CD player
Start playing your programmed
track sequence, then...
Press to access the CD edit function
EDITED
The lower display now reads
STORE?
then
Press to memorize the programmed
STORE
sequence permanently
The cue CD ED appears in the upper
display, indicating that the
programmed sequence has been
memorized permanently for the
current CD
Plays the CD in its edited version
CD
The cue CD ED appears in the
display together with the
programmed track numbers
Plays the CD in full, disregarding any
CD ED
programmed track sequence
The cue CD ED disappears, and all
the tracks numbers light up
then
If you want to clear a programmed
EDITED
sequence, press EDITED
The lower display now reads
CLEAR?
then
Press to clear the programmed
CLEAR
sequence completely
Editing a CD
The edit function enables you to
program track sequences for individual
CDs and memorize them permanently,
so that whenever you load such an
edited CD only the programmed tracks
will be played.
To edit a CD you must first program a
sequence of tracks as described on page
13.
When the sequence starts playing, you
must press EDITED, then STORE. The cue
CD ED appears in the upper display,
indicating that the track sequence has
been memorized permanently for this
particular CD.
The next time you start this CD, only the
programmed tracks will be played, as
indicated by the information in the
upper display.
If you want to override the programmed
sequence, that is, hear the CD in full,
you must start playing the CD, and then
press the CD ED button in the middle
section of the operating panel. This will
make the CD ED cue in the upper
display disappear and all the track
numbers light up again. Press CD ED
again to restore the programmed
sequence.
You may also clear a programmed
sequence completely. To do so, start
playing the CD concerned, then press
CD ED to override the programmed
sequence. The programmed sequence is
now temporarily suspended. Now press
EDITED. Press CLEAR immediately to
clear the sequence.
Note: A maximum of 100 different CDs can be
edited. If you exceed this limit, the display will
read ILLEGAL, and you will have to clear a
sequence before you can program another.