Programming A Sequence Of Tracks - Bang & Olufsen BeoCenter 2300 User Manual

Programming a sequence of tracks

You can program the CD player to play
only certain tracks on the CD.
Before programming you must start
playing the CD. If you don't want
playing to continue while you are
programming the track sequence, press
STOP.
The CLEAR and STORE buttons in the
right-hand side of the operating panel
give access to programming a track
sequence. The CLEAR button excludes
tracks you don't want to hear; the
STORE button includes tracks you want
to hear.
For each track you want to exclude or
include in the sequence you must first
press CLEAR or STORE, then the appro-
priate number.
If you are scanning a CD and want to
program a track sequence simul-
taneously, you need only press CLEAR or
STORE while the appropriate track is
being played. Immediately you press
CLEAR or STORE, the next track on the
CD starts playing.
The PLAY button or the CD button
starts playing your programmed
sequence. While the sequence is playing
you can step from one track to the next
>
by using the STEP button.
If you want to cancel the CD sequence you have
just programmed, press CLEAR and keep it
depressed until the display reads CLEARED.
The track sequence will also be cancelled when
you unload the CD.
If you want to memorize a track sequence
permanently, you must use the edit function. See
page 14 for details.
Starts playing the CD
If you want to pause the CD while
programming, press STOP
Accesses the programming function
STORE appears in the display
– –
Key in the first track number you
want in the sequence,
for example 2
STORE 2 appears in the display
–
Alternatively, press CLEAR, then the
appropriate number to skip tracks
you don't want in the sequence
Within one second ACCEPTED
appears in the display, indicating
that your chosen track has been
stored (or cleared)
If ILLEGAL appears in the display,
this is a sign that the chosen track
number does not exist on the CD
Stores the next track in the
sequence,
for example 4
Continue to store (or clear) tracks
one by one using this method until
your track sequence is complete
Plays the sequence
Clears the sequence
(hold down for 2 seconds)
13
CD
then
STOP
STORE
then
2
STORE
then
4
PLAY
or
CD
CLEAR
↓