Page 2
Legal Notice for the US market: CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To prevent fire or electric shock, do not expose this appliance to rain or moisture.
Page 3
A movable music centre Place your BeoSound 1 where you like. The compact design enables you to bring it with you anywhere. BeoSound 1 gives you an excellent sound experience no matter how near or far you are from the speakers. The sound is optimised and no additional settings are required.
Make sure that the BeoSound 1 is always placed on a firm, stable surface. The BeoSound 1 is designed for indoor use in dry, domestic environments only, and for use within a temperature range of 10–40°C (50–105°F).
Page 5
16 Automatic tuning 17 Manual tuning 17 Delete a radio station Remote control operation 18 Operating BeoSound 1 with Beo4 Use the PIN code system 20 Enter a PIN code 20 Switch on the PIN code 21 Change the PIN code...
Page 6
STOP is used to pause and stop the CD player, for programming Stop Timers and tuning in radio LOAD is used to open and close the CD compartment Your key to using BeoSound 1 Operation is easy. The buttons essential to daily operation are on the right-hand side, while those on the left-hand side have secondary functions.
Page 7
• Press LOAD again to lower the compartment or just press CD to play your CD. Remove the cover at the back of BeoSound 1 and connect the headphones to the socket. The speakers will be muted when headphones are connected.
Page 8
You extend the built-in aerial by pressing the AERIAL button. You can store up to 59 different radio stations in your BeoSound 1 (see page 12). To step between stored radio stations, the program number or frequency must be shown in the display.
You can turn the volume up and down at any time. If you store a volume level, the BeoSound 1 starts at this level next time it is switched on. The maximum volume level is 72, but the maximum level that can be stored is 60.
Page 10
NOTE: The Stop Timer function can only be used if at least one radio station is stored. Make BeoSound 1 stop at a specific time Make a Stop Timer You can set how long the radio is to play before it switches to standby.
Page 11
The BeoSound 1 has a built-in 24 hour clock. You must set the clock yourself. If you want to make use of the Wake-up Timer function described on the next page, you must first make sure that the built-in clock in the BeoSound 1 has been set correctly.
Page 12
You can make BeoSound 1 wake you up in the morning. The Wake-up Timer is a once-only Timer. Like an alarm clock it is deleted once it has been executed. While the Timer is executed, the time is shown in the display, when you...
Page 13
You can call up the settings for the Wake-up Timer in the display to check the time or to delete the Wake-up Timer. While BeoSound 1 is in standby, press and hold until the time for the Wake-up Timer is 7.10...
Page 14
If you only like some tracks on a CD, you can set BeoSound 1 to ignore the ones you do not like. You make this selection by “deleting” the tracks you do not want to listen to. The CD player remembers your selection as long as you leave the CD in the CD compartment.
NOTE! When performing search tuning in areas with many empty channels in the frequency band, it might be an advantage not to extend the built-in aerial, BeoSound 1 will then skip most empty or weak channels. Tune in radio stations...
Page 17
Delete radio stations You can delete the stored radio stations any time. RADIO Press RADIO to switch on the radio RADIO Press to find the requested radio station DELETE Press DELETE twice to delete the radio station playing. The dis- play will blink and the radio will switch to the next program number...
Page 18
Press the green button to extend or retract the built-in aerial Press the yellow button to open or close the CD compartment Press to raise or lower volume Press in the middle to mute sound Press to switch the BeoSound 1 to standby...
Use the PIN code system Enter the PIN code If the PIN code system is activated and your BeoSound 1 is disconnected from the mains, you are requested to key in the four-digit PIN code when the system is first switched on.
Page 21
If you have forgotten your PIN code, you must contact a retailer who then requests a five- digit Master code from Bang & Olufsen. Once you have keyed in this code, your BeoSound 1 is operational again and the PIN code system is deactivated.
For your information… Your needs as a user are given careful consideration during the design and develop- ment process of a Bang & Olufsen product and we strive to make our products easy and comfortable to operate. Therefore, we hope that you will take the time to tell us about your experiences with your Bang &...
Page 23
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the BeoSound 1 and is the answer not in the manual?
Questions and answers