Naming Cds - Bang & Olufsen BeoCenter 2300 User Manual

Naming CDs

You can give a short name of your own
choice to every CD in your collection.
This means that whenever a CD is
playing, its name is read out in the
lower of the two displays.
Note: A maximum of 100 different CDs can be
named. If you exceed this limit, the display will
read ILLEGAL, and you will have to clear the
name of a CD before you can name another.
Listing names
All the names of your CDs and their
appropriate track sequences, if any, can
be displayed one by one, without you
having to load all the CDs one by one.
This is useful if you want to quickly leaf
through all the names in your collection.
TRACK 1 2 3 4 5 6 7 8 9 10
M O Z A R T
The name may contain up to 8 characters,
including numbers. If you haven't given a name to
the CD, ths display will read out track number
track time, or remaining time instead, as
described on page 11.
Note: You may even, if you like, clear a name and
track sequence simultaneously while you are
leafing through the names. This is useful if you
know exactly which CD name you want to clear,
but do not want to load the appropriate CD, or
perhaps cannot find it.
If you want to clear a name (and track sequence),
press CLEAR while the appropriate name is
displayed.
Play the CD you want to name
Access the naming function
The cue NAMING: appears briefly,
then the display blanks. If you have
already entered a name, that name
will appear
The first of the eight character
positions blinks, indicating that you
can start "writing" a name
Reveals the characters one by one
Moves to the next character position
Stores the name
If you want to clear the name, press
CLEAR while the name is displayed
Play any CD
Access the memory function
The cue MEMORY appears briefly,
then the name of the current CD
appears
Press to list the names one by one
Cancels the memory function and
resumes playing
15
CD
GO TO
>
STEP
or
<
STEP
or
STORE
CD
2 x
GO TO
>
STEP
or
<
STEP
CD