Entering Route Points - Navigon 40 essential User Manual

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first leg of the route is therefore the journey to the route point with
flow number "1".
1. Tap on the Specify Starting Point box.
The S
If you want to enter your current location as the starting point:
2. Tap on the Current Position menu item.
If you want to enter a different starting point:
2. Tap on the corresponding button.
3. Enter the starting point. (Refer to the corresponding section of the
chapter "Specifying a destination" on page 28.)
4. Tap on
The selected starting point will now be shown next to the 0 (Starting
Point) button.
Changing the starting point
Tap on the starting point (button 0).
►
The S
starting point. Proceed as described above.
5.4.2

Entering route points

The route points of a route are the destinations that you want to
navigate to.
The flow number for each route point is indicated on a button in front of
it.
1. Tap on the Add Route Point box.
The R
2. Tap on the button for how you want to enter the destination.
3. Enter the route point. (Refer to the corresponding section of the
chapter "Specifying a destination" on page 28.)
4. Tap on
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
- 44 -
P
TARTING OINT
(Set Starting Point).
P menu opens. You can now enter a different
TARTING OINT
P menu opens.
OUTE OINT
(Add).
menu opens.
Navigation