Entering Route Points; Editing Route Points - Navigon 7310 User Manual

If you want to enter your current location as the starting point:
If you want to enter a different starting point:
Changing the starting point
6.4.2
6.4.3
Navigation
This Manual: http://www.manuallib.com/file/2548689
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first leg of the route is therefore the journey to the route point with
flow number "1".
1. Tap on the Specify Starting Point box.
The S P
TARTING OINT
2. Tap on the Current Position menu item.
2. Tap on the corresponding button.
3. Enter the starting point. (Refer to the corresponding section of the
chapter " S pecifying a destination" on page
3
4. Tap on Set Starting Point.
The selected starting point will now be displayed next to the 0
button (Starting Point).
Tap on the starting point (button 0).
►
The S P
TARTING OINT
starting point. Proceed as described above.

Entering route points

The route points of a route are the destinations that you want to
navigate to.
The flow number for each route point is indicated on a button in front of
it.
1. Tap on the Add Route Point box.
The R P
OUTE OINT
2. Tap on the button for how you want to enter the destination.
3. Enter the route point. (Refer to the corresponding section of the
chapter "
S pecifying a destination" on page
3
4. Tap on Add.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.

Editing route points

Route points can be deleted from a route. The order of the route points
can be changed as you wish.
menu opens.
menu opens. You can now enter a different
menu opens.
User's manual NAVIGON 7310
2 5.)
3
2 5).
3
- 40 -