Lighting Instructions; Lighting Your Grill; First Time Operation - Blaze BLZ-3NG Use & Care Manual

Caution: Never operate the grill unattended.
Prior to using your grill, verify that all of the following is correct:

The burner tube is free of any debris or obstruction.

Installation of the proper gas type and regulator settings.

The proper gas connection is complete.

Minimum clearances are maintained.

All packaging has been removed.

All parts and components are properly in place.

An installer-supplied manual gas shut-off valve is fully accessible.

LP hose is clean and inspected for cuts, wear, abrasion, or leaks. Replace if
necessary with a suitable UL, ETL or CSA Listed part with internally threaded connector.

LIGHTING YOUR GRILL

 Become familiar with the safety instructions at the front of this manual. Do not smoke
while lighting the grill or checking the gas supply connections.
 Make sure that all gas connections are securely tightened and have been leak-tested
with a soapy water solution - never with a flame!

FIRST TIME OPERATION

Before cooking with your grill for the first time, burn off any foreign matter and rid the unit of
any odors by burning the unit on HIGH with the lid down for about 10 minutes. When lit, the
flame should have a bluish color to it. It may have a tint of yellow and adjustment to the air
shutters can be made to obtain a blue flame and proper gas glow. This grill should be
preheated with the main burner control settings on HIGH for five minutes with the hood
closed.
Version 1.0

Lighting Instructions

Blaze Outdoor Products Instructional Book
Page | 21