Access To Components; Work-Top; Pressure Switch; Suppressor - Electrolux P6000 (Nexus) Series Service Manual

6 ACCESS TO COMPONENTS

6.1 Work-top

a. Remove the two rear screws (1), push the work-top towards the rear of
the appliance and detach.
6.1.1

Pressure switch

a. Remove the work-top.
b. Detach the wiring connectors.
c. Press the anchor tabs (2) and pull towards the rear.
d. Detach the pressure switch tube.
6.1.2

Suppressor

a. Remove the work-top.
b. Detach the wiring support from the crosspiece and move downwards
(3).
c. Remove the suppressor.
d. Detach the wiring connectors.
6.1.3

Solenoid valve

a. Remove the work-top.
b. Unscrew the water fill hose from the solenoid valve.
c. Detach the wiring connector.
d. Detach the solenoid valve from the support (4).
e. Remove the hose clamp and detach the solenoid valve from the hose.
2005.11 dmm
49/60
599 37 38-46