Washing Machine Programmes - Electrolux P6000 (Nexus) Series Service Manual

3.9 Washing machine programmes

Pre-wash
(not for wool and, in some
cases, delicate fabrics)
Wash
1st rinse
2nd (3rd) rinse
Final rinse (softener)
(Rinse-hold)
Final spin
2005.11 dmm
1. Water fill with detergent introduced from the pre-wash compartment
2. Brief heating phase and hot wash (30 - 40°C)
3. Drain
4. (Brief spin)
1. Water fill with detergent introduced from the wash compartment
2. Heating and hot wash
- 30÷90°C for cotton and linen
- 30÷60°C for synthetic fibres
30÷40°C for wool, silk and delicate fabrics
-
3. Maintenance phase (mechanical action after the heating phase)
4. Cooling water fill (in cotton cycles, reduces the temperature of the drain
water, in synthetic cycles as an anti-crease cycle)
5. Drain
6. Brief spin (cotton/linen only)
1. Water fill (and, if selected, introduction of bleach for cotton/linen only)
2. Cold wash
3. Drain
4. Brief intermediate spin (if selected - cotton/linen only)
1. Water fill
2. Cold wash
3. Drain
4. Brief intermediate spin (if selected - cotton/linen only)
1. Water fill to softener compartment
2. Cold wash
1. In cotton/linen cycles, the programme generally passes to the subsequent
phase; it stops with water in the tub (rinse-hold) only if this function has
been selected (certain models only)
2. The cycle generally stops with water in the tub (rinse-hold) for synthetic,
delicates and wool cycles if there is no rinse-hold button or selector. If these
are featured (rinse-hold, delicate spin, anti-crease etc.), the cycle may stop
or pass to the subsequent phase according to the option selected.
1. Drain
2. Final spin
- at maximum speed for cotton/linen
- brief and at reduced speed for synthetics, delicates and wool (certain
models only)
STOP
18/60
599 37 38-46