Table of Contents
Advertisement
6.2 Control panel
a. Remove the work-top.
b. Extract the detergent drawer. (Fig.5)
c. Remove the screws that secure the control panel to the control panel
support. (Fig.6)
d. Remove the lateral (b) screws which secure the control panel to the
crosspiece and release the anchor tabs (a) from the support. (Fig.7)
e. Release the control panel from the lower right-hand guide and
remove. To facilitate its release, unscrew the screw which secures it
to the cabinet and lift the control panel support slightly. (Fig.8).
6.2.1
Push-button
a. Remove the control panel.
b. Using a screwdriver, widen the pushbutton anchor pin and remove the pushbutton.
c. Remove the pushbutton. Using pliers, close the anchor tabs which secure the button to the cross-
member and push towards the interior of the appliance.
d. Detach the connector.
6.3 Electronic control
6.3.1
Main electronic control (EWM2000EVO-EWM3000NEW)
a. Remove the top.
b. Remove the screw (c) which secures the support to the
board casing (Fig.9).
c. Detach the wiring from the supports.
d. Move the board towards the interior of the appliances.
e. Extract the casing-PCB assembly.
f.
Detach the connectors.
2005.11 dmm
5
7
50/60
6
8
c
9
599 37 38-46
Advertisement
Table of Contents
