5.10 NTC temperature sensor integrated in the heating element
5.10.1 General characteristics
In the electronic models an NTC sensor is used to control the washing temperature. In these sensors, the
internal resistance decreases as the temperature increases. This reduction in resistance is detected by the
electronic control system which, when the desired temperature is reached, disconnects the heating element.
1. NTC resistor
2. Metal capsule
3. Terminals
4. Plastic casing
TEMPERATURE
(ºC)
20
60
80
5.10.2 Electrical symbol
Checking for efficiency
Use a tester to check that the resistance of the sensor corresponds to the temperature.
2005.11 dmm
RESISTANCE (Ω)
Rated value
6050
1250
640
46/60
Maximum value
6335
1278
620
Minimum value
5765
1222
660
599 37 38-46