Installing The Printer Driver By Creating A Printer Port - Konica Minolta bizhub C652 User Manual

4.1 Windows Vista/7/Server 2008/Server 2008 R2

Installing the printer driver by creating a printer port

0 Installing the driver to Windows Vista/7/Server 2008/Server 2008 R2-based computers requires the
administrator authority.
0 Since the printer is searched for during the installation, be sure to connect the machine to the network
before turning it on.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Press the [Start] key, and then select "Control Panel".
3
Select the printer functions from "Hardware and Sound".
% In Windows Vista/Server 2008, click "Printers" under "Hardware and Sound". When "Control Panel"
is displayed in Classic View, double-click "Printers".
% In Windows 7/Server 2008 R2, click "View devices and printers" under "Hardware and Sound".
When "Control Panel" is displayed in an icon view, double-click "Devices and Printers".
4
Click [Add a printer] on the toolbar.
"Add Printer Wizard" starts.
5
Click "Add a local printer".
The page for selecting a printer port appears.
6
Click "Create a new port", and then select the port type.
% To use the LPR/Port 9100 protocol, select "Standard TCP/IP Port".
% To use the SMB connection, select "Local Port".
7
Click [Next].
8
Specify the IP address and port.
% To use the LPR/Port 9100 protocol, select "TCP/IP Device", and then enter the IP address.
% To use the SMB connection, enter "\\NetBIOS name\print service name" in the "Port Name" box.
% Enter the same NetBIOS name and print service name specified in "Print Setting" in "SMB Setting".
9
Click [Next].
% If the "Additional Port Information Required" or "More Port Information Required" dialog box
appears, go to Step 10.
% If the "Install the printer driver" page appears, go to Step 13.
10
Select "Custom", and then click [Settings].
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
% If both LPR and Port 9100 are enabled on the printer, the printer driver is connected to the machine
using LPR.
12
Click [Next].
The "Install the printer driver" page appears.
13
Click [Have Disk].
14
Click [Browse].
15
Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver, XPS driver and fax driver
bizhub C652/C652DS/C552/C452 (Version 2)
4
4-5