Logging In Using The Authentication Unit - Konica Minolta bizhub C652 User Manual

11

Logging in using the authentication unit

1
Press [Auth. Unit], and then press [Begin Printing].
2
Touch the authentication unit with the finger or IC card.
To log in, touch the authentication unit.
Once the user is authenticated, the print job is printed.
% Press [Print & Access] to enable printing of the job and a normal login.
% Logging in by pressing [Access] allows you to log in as usual without printing a job. After logging in,
open the ID & Print User Box to print the document.
% If [ID & Print Operation Settings] is set to [Print All Jobs] when there are multiple jobs, all jobs are
output in a single authentication. If it is set to [Print Each Job], the jobs are printed one by one in the
order they have been stored.
Reference
- You can specify [ID & Print Operation Settings] in [User Authentication/Account Track] - [User
Authentication Settings] - [Administrative Settings] - [ID & Print Operation Settings] of the Administrator
Settings of the machine. For details, refer to page 12-56.
- To select the documents to print when there are multiple print jobs, press [Access] and then print the
desired documents from the ID & Print User Box.
- Even when the authentication unit is installed, you can enter the user information and print using [ID &
PW]. For details, refer to page 11-27.
- To change the operation ([Begin Printing], [Print & Access], or [Access]) selected in the initial page,
select [Administrator Settings] - [User Authentication/Account Track] - [User Authentication Settings] -
[Administrative Settings] - [Default Operation Selection]. For details, refer to page 12-57.
Reference
- For details on the optional authentication units, refer to the "User's Guide [Copy Operations]".
11-30 bizhub C652/C652DS/C552/C452 (Version 2)
ID & Print 11.6