Sapido GR-1102 User Manual page 89

b. WAN: the client can only access to the Internet.
(6.) Active Client List: display the properties of the client which is connecting
successfully.
(7.) Apply Changes: Please click Apply Changes to initiate or click Reset to
cancel.
Network Type： ： ： ：
4.
Please select "Infrastructure" or "Ad hoc." The default is "Infrastructure." The selection
is disabled when wireless mode is selected to AP.
SSID： ： ： ：
5.
Please input your wireless network name. Default is "SAPIDO_Mobile_Hotspot".
6. Channel Width
Please select "20MHZ" or "40MHZ" channel width to change the transmission channels.
7. ControlSideband
Setting the Sideband "Upper" or "lower."
8. Channel Number
Please select your wireless network channel. There are Auto, 2~11.
9. Broadcast SSID
Enable or disable the SSID broadcast function. Disable this feature can provide more
security of your WLAN.
10. Data Rate
Rate at which data can be communicated (bps); auto, 1M, 2M, 5.5M, 11M, 6M, 9M, 12M,
18M, 24M, 36M, 48M or 54M to be selected from the drop-down list.
11. Associated Clients
Check the WiFi ISP connectors and the connecting status.
12. Enable Mac Clone (Single Ethernet Client)
Copy the MAC Address for identity of some ISPs.
http://www.sapido.com.tw 89 User's Manual V1.0